Easy Step High-Guard Gate

This pet gate's tall 41" height keeps larger, active pets contained while 7" x 10" small door lets cats pass through to access food/litter. Perfect for kittens or senior cats that can't jump over a gate. Locking lever-style handle, rounded corners, and durable all-steel construction for safety and security. Wall cups screw into wall for the ultimate in safety. One 6" extension included for openings up to 41" wide. Please specify color: White, Platinum, or Black. 29-1/2"-35" wide x 41" high. Can expand to 41" wide with included extension.

Features

• Gate (1)
• Threaded Spindle Rods (4)
• Hand Wheels (4)
• Wall Cups (4)
• Attachment Screws (4)
• 6" extension

Screw on each hand wheel to a threaded spindle rod with the hollow side of the hand wheel facing away from the white pad on the end of the spindle.

Insert the assembled threaded spindle rods and hand wheels into the appropriate holes in the plastic end plugs at the top and bottom tube ends of the gate.

Installation instructions:

1. Position the gate in the required opening. It may be necessary to squeeze together the top part of the frame.

2. Position the gate so that the gate opens to the side the pet will be.

3. Place a wall cup over each spindle rod. Turn the bottom hand wheels so as to extend the adjusting spindles until the base is held firmly and the gaps on either side of the gate are as equal as possible. Then turn the top hand wheels to extend those adjusting spindles to reduce the gap between the handle and the side rail. The gate is correctly positioned when the gap between the handle and the side rail is about 1/16".

   IMPORTANT: It is essential that the gate be as nearly vertical as possible and that it be closed and locked at the top and bottom before marking the position of the wall cups.

4. Mark the position of the wall cups on the wall with a pencil and remove the gate. NOTE: If installing the gate in a doorway, ensure that the cups do not interfere with the closing of the door.

5. Using the screws provided, screw the wall cups in their marked positions. The screws provided are suitable for a minimum wood thickness of 3/4".

6. Replace the gate inside the attached wall cups. Turn the bottom hand wheels until the base is held firmly, again ensuring that the gaps on either side of the gate are as nearly equal as possible. Then turn the top hand wheels toward the gate frame to reduce the gap between the handle and the side rail until it is about 1/16". Do not over-tighten as that may prevent the locking mechanism from functioning.

Do not use more than two extensions per gate.

• Assemble the gate using the assembly instructions above up to step 5.
• Choose the side of the gate to be extended and remove the top and bottom adjusting spindles and hand wheels.
• Insert the top and bottom spindles of the extension into the top and bottom of the gate. Attach the adjusting spindles and hand wheels you removed from the gate into the side of the extension nearest the wall.
• Finish assembling the gate per steps 5 and 6, above.