Exo Terra Ultrasonic Fogger

Add ambiance to your herptile terrarium while maintaining beneficial humidity. The Fogger can increase humidity by as much as 100%, diffusing about 200 ml of water per hour. Easy to operate, it includes a 24-volt transformer pack and operates in as little as 5 cm of water (or inside water features like the waterfall).

Use Fogger in reptile habitats to simulate low clouds/fog in tropical setups or generate early morning dew in desert terrariums. Features an automatic shut-off for low-water situations and an on/off indicator light. Must be plugged into a GFCI outlet. Constructed of nickel-plated brass.

Please click on "More Information" for further details.

• Increases air humidity levels up to 100%
• Diffuses 200 ml of water per hour
• Great visual effect for terrariums
• Creates moisture for dew-lapping reptiles and aquatic life

The ultrasonic fogger is an easy way to add ambiance and humidity to your terrarium.

Specifications

Operating Instructions
Place the fogger in the water portion of the terrarium so that water fully covers the water level sensor. The fogger works best when the top of the water level sensor is 5-30 mm below the surface.

Connect the power pack to the fogger cable and plug in to a suitable wall socket. For optimum performance, please ensure the cable is fully unrolled and the water is at room temperature.

Automatic Shut Off
When the ON/OFF indicator is lit up, the fogger is operating and producing mist. If the water level falls below the minimum level of 45 mm, the water level sensor automatically turns the fogger off and the ON/OFF indicator light is switched off.

The ceramic membrane has a limited lifespan and will need to be replaced from time to time, when the ON/OFF indicator is lit up but the device is not producing mist. The ceramic membrane is sold separately as a replacement kit.