Use the following chart to help you choose the best UV sterilizer for your application:
40 & 120
||Includes all-quartz bulb;
Optional horizontal mounting kit;
||Quartz sleeve and twist design provide 3 times more UV exposure;
Hang-on tank bracket included
||Compact and versatile units are ready to install;
Install in vertical or horizontal position right in your aquarium or sump
||4-in-1 canister filter with mechanical, chemical & biological filtration - plus UV sterilizer
||Includes additional mechanical filtration;
Optional biological filtration for finely polishing water
Choosing the Right Size Unit
The chart below provides guidelines for determining the bulb size and flow rate you require for UV sterilization. To use this chart, identify the maximum gph rating in either column that most closely matches the number of gallons in your aquarium. The maximum flow rate should be greater than the number of gallons in the system (tank & sump).
For example, if you have a 100 gallon tank and want to control parasites, you would need a minimum 18 W UV with a maximum flow rate of 100 gph. A 25 W UV at a flow rate of 150 gph would be preferable. With UV sterilizers, bigger is better.
|Maximum Flow Rate for Controlling:
|Bacteria and Algae
||under 75 gallons
While UV sterilizers usually do no harm, do not use one when you first cycle your aquarium, as it may kill beneficial bacteria before they attach to the bio-media or gravel. Also, many medications can be "denatured" by the UV light, so the sterilizer should be turned off when using medications, especially chelated copper treatments. The UV light will "break" the bond of the chelating agent, and the aquarium will have a sudden, lethal concentration of ionic copper.
Once you introduce a UV Sterilizer into your system, carefully monitor your aquarium's temperature. Depending on your aquarium size and flow rate, a UV Sterilizer may add heat to your aquarium water. If this occurs, you may wish to consider installing a chiller.
As with all sophisticated pieces of equipment, your UV Sterilizer needs to be properly maintained to remain effective. Quartz sleeves should be cleaned at least every six months. UV bulbs will need to be replaced after 9 to 12 months of continuous use.
UV sterilizers have many advantages and very few drawbacks. In addition to being easy to install, requiring low maintenance, and being affordable, they can provide huge health benefits for your fish. Make sure you get one that is the correct size, operate it under the appropriate conditions, and follow the manufacturer's maintenance guidelines to ensure that your UV sterilizer can do the job it was designed for.